Thermoelectric Cooler - 40x40mm

Thermoelectric Cooler - 40x40mm
  • Výrobce: SparkFun
  • Kat. číslo výrobce: COM-10080
  • Záruka (měsíců): 24
Kód produktu: SP210
Cena bez DPH: 322,00 Kč
Cena s DPH: 389,62 Kč
Počet kusů skladem: 3
Dostupnost: Skladem


Thermoelectric Cooler - 40x40mm

Description: Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. The Thermal Tape listed below works very well to attach heat sinks to the hot side.

This Peltier works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or other block of metal to pull heat from the hot side. We were able to use a computer power supply and CPU heatsink to make the cold side so uncomfortable we could not hold our finger to it. This is a nice custom made solar panel, which mates directly with many of Seeed Studio development boards and has a high efficiency at 15.5%. The solar panel has a clear epoxy coating with hard-board backing. It has a robust sealing for outdoor applications!



  • 40 x 40 x 3.6mm
  • lmax - 7A
  • Umax - 15.4V
  • Qcmax - 62.2W
  • Tmax - 69C
  • 1.7 Ohm resistance
  • 127 thermocouples
  • Max Operating Temp: 180℃
  • Min Operating Temp: -50℃



Thermoelectric Cooler - 40x40mm - Related Products

Arduino Mega 2560 Rev3Arduino Mega 2560 Rev3

Arduino Uno Rev3Arduino Uno Rev3

© 2015 Všechna práva vyhrazena.