Color LCD Joystick Shield

Color LCD Joystick Shield
  • Výrobce: ElecFreaks
  • Kat. číslo výrobce: EF02019
  • Hmotnost: 40g
  • Záruka (měsíců): 24
Kód produktu: EF13
Cena bez DPH: 362,00 Kč
Cena s DPH: 438,02 Kč
Počet kusů skladem: 7
Dostupnost: Skladem

Color LCD Joystick Shield

Description: The Color LCD Joystick Shield is based on Sparkfun design. The modifications and improvements are the backlight is possible to drive by PWM (D10) and buttons were replaced by 4 direction joystick with switch (A0-A4). Described improvements make the shield very easy to operate and more usable with dimmable backlight. The Color LCD Joystick Shield is based on display controller Philips PCF8833 and popular Nokia 6100 LCD Panel.

Color LCD Joystick Shield

The Color LCD Joystick Shield provides an easy method for connection of handy Nokia 6100 LCD to your Arduino. The board comes as shown with the 128x128 mini color LCD as well as with embedded backlight driver circuit (boosts to 7V) controlled by PWM.
The Nokia 6100 LCD is controlled through a 9-bit SPI interface. The control pins of the LCD are connected to the hardware SPI pins of the Arduino (D13 -SCK, D11 - DIO), the CS pin is tied to D9 and the reset pin is connected to D8. Voltage from the '5V' pin of the Arduino is boosted to 7V to power the LCD backlight.
Note: pin headers are included and soldered on the PCB

Color LCD Joystick Shield Application


Please visit ElecFreaks wiki page for more info about this product. You are welcome to improve the documents; add more demo code or tutorials. 

© 2015 Všechna práva vyhrazena.