Arduino Ethernet Shield SD

Arduino Ethernet Shield SD
  • Výrobce: Smart Projects
  • Hmotnost: 27g
  • Záruka (měsíců): 24
Kód produktu: AD41
Cena bez DPH: 542,00 Kč
Cena s DPH: 655,82 Kč
Dostupnost: Vyřazeno

Arduino Ethernet Shield SD

The Arduino Ethernet Shield SD has been replaced with a newer version Arduino Ethernet Shield Rev3 WITHOUT PoE Module.

Description: The Arduino Ethernet Shield SD provides a connection to the Internet for an Arduino board. It is based on the ethernet chip Wiznet W5100 affording a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield SD supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield.

Compare to an older Arduino Ethernet Shield the new Ethernet Shield SD includes a micro SD card connector, it is compatible with Arduino Mega (using ethernet library coming in Arduino 0019) and it contains embedded reset controller. 

The Ethernet Shield SD connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.

Arduino communicates with both the W5100 and SD card using the SPI bus (through the ICSP header). This is on digital pins 11, 12, and 13 on the Duemilanove and pins 50, 51, and 52 on the Mega. On both boards, pin 10 is used to select the W5100 and pin 4 for the SD card.

The Arduino Ethernet Shield SD provides a standard RJ45 ethernet jack.

The reset button on the shield resets both the W5100 and the Arduino board.

The shield contains a number of informational LED.

Check the Arduino Ethernet Shield SD product page for more details.


Dimensions: 73,7 x 53,4 x 29 mm



Replaces: Arduino Ethernet Shield

© 2015 Všechna práva vyhrazena.