New Products!!!

18.04.2010 18:12

We have added especially products you have been asking for and also some other stuff needed for our projects. Finally we have incorporated quite a lot of new things - especially Sensors, Arduino Shields and Components.

Let´s have a look at the most interesting...

We have heard (from an android) that every Arduino Robot dreams about a VoiceBox Shield - an effective solution how to make a great robot-sounding voice using SpeakJet chip. :-)

The MIDI Shield board gives your Arduino access to the powerful MIDI communication protocol, so you can control synthesizers, sequencers, and other musical devices. This shield is great for adding complex sound control to the Arduino!

The Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface. The serial interface is easy to use and it lets the user select an individual motor, the direction, and the desired speed constant. Great for precise control of your next robotics project!


Zilog's ePIR is a miniature fully functional motion-detecting single-board computer (SBC). Combined on this board is the Z8 Encore! XP MCU and a Murata passive infrared (PIR) sensor, which is shielded by a Fresnel lens. Taking advantage of the processing capabilities of the Z8 MCU, the ePIR uses a powerful new statistical processing method to provide exceptional motion detection performance. It is really small and useful!.


The Color LCD Shield provides an easy method of connecting the popular Nokia 6100 LCD to your Arduino USB or Pro. The board comes as shown with the 128x128 mini color LCD, as well as a backlight driver circuit (boosts to 7V), and three momentary push-buttons.


The well known ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals.

UartSB V2.2 adds USB connectivity to your project easily. It's pluggable to computer USB port with an easy to find mini USB cable, with user oriented consideration to maximize the functionality of an USB-Uart adapter. More over, it is a carefully designed Xbee and Bluetooth adapter, you may establish wireless connection with host PC easier than ever before.

Large pack of 70pcs breadboard jumper wires with male connectors!

And also a large pack of 50pcs jumpers with female connectors. Let´s take a breadboard and go ahead!

The PC-27 Internal PCB Antenna is an ultra miniature rectangular groundplane dependent Quad-band GSM antenna that can be easily integrated into the design with a GSM device. It has an MMCX male connector so it can be directly connected to the Telit GSM Modules GM862-QUAD or GM862-QUAD-PY.


SMA to MMCX Interface cable. Adapts MMCX jack to a standard SMA bulkhead. This cable interfaces to the Telit GSM Modules GM862-QUAD or GM862-QUAD-GPS or GM862-QUAD-PY.

This is a joystick very similar to the 'analog' joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers - one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated when the joystick is pressed down.


This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the reeds separate and the switch opens. This makes for a great non-contact switch.

We have also added several Super Bright LEDs (Red, Blue, Yellow, White, Green).



If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V.


This is a very simple breakout board for the popular Compass IC HMC6352. Remember the KISS mantra? We really enjoy the simplicity and ease of use with the HMC6352. If you need simple, clean, degree resolution compass heading, this is the way to go.


Simple breakout board for the SHT15 humidity sensor from Sensirion. The SHT15 digital humidity and temperature sensor is fully calibrated and offers high precision and excellent long-term stability at low cost. The digital CMOSens Technology integrates two sensors and readout circuitry on one single chip. This is a fundamental part for any weather station!


The 125kHz RFID module is designed for reading code from 125KHz/ 134.2KHz card compatible read-only tags and read/write card . It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc.

The 433MHz RF Link kit consists of easy to use RF transmitter and receiver! This combination is very useful for remote control of various devices.

This is a very small photocell. A photocell changes (also called a photodetector, CdS or photoconductive cell) resistance depending on the amount of light it is exposed to. These little sensors make great ambient light triggers (when light in the room turns on, do something).


This Infrared sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm).



© 2015 Všechna práva vyhrazena.