Vyhledávání

VoiceBox Shield

VoiceBox Shield
  • Výrobce: SparkFun
  • Kat. číslo výrobce: DEV-09799
  • Hmotnost: 13g
  • Záruka (měsíců): 24
Kód produktu: SP32
Cena bez DPH: 815,00 Kč
Cena s DPH: 986,15 Kč
Počet kusů skladem: 2
Dostupnost: Skladem

VoiceBox Shield

Description: The VoiceBox Shield is an Arduino shield that can be mounted on top of your Arduino USB Board or Pro, to give it access to all capabilities of the SpeakJet voice and sound synthesizer. The Voice Box Shield uses the SpeakJet chip to convert serial commands into a great robot-sounding voice.

Populated on the VoiceBox Shield are the 18 Pin SOIC (surface mount) SpeakJet IC and a two stage audio amplifier with a potentiometer to set the gain. You can connect a speaker directly to the 'SPK+/-' pins, and get your Arduino-bot talking with very minimal work!

You can control the SpeakJet through either its serial line, or the eight event input lines which are connected to digital pins 5-12. A 3-way jumper allows you to connect either the software (D2) or hardware (D1) TX pin of the Arduino to the SpeakJet's serial input.

Also included on the shield are a 13x7 grid of 0.1" pitch through-holes for prototyping, the Arduino's reset button. Headers are not soldered on, we recommend our Stackable Header Kit.

You will need to connect a speaker. Check our mini loudspeaker or loudspeaker!

 

Dimensions: 53,5 x 59,6 mm

 

References:

© 2015 Všechna práva vyhrazena.

www.hwkitchen.com