Vyhledávání

SparkFun Inventor's Kit for RedBot

SparkFun Inventor's Kit for RedBot
  • Výrobce: SparkFun
  • Kat. číslo výrobce: ROB-12649
  • Záruka (měsíců): 24
Kód produktu: SP861
Cena bez DPH: 2 790,00 Kč
Cena s DPH: 3 375,90 Kč
Počet kusů skladem: 3
Dostupnost: Skladem

SparkFun Inventor's Kit for RedBot

Description: The SparkFun Inventor’s Kit for RedBot is a great way to get started with two motor robotics and sensor integration using the Arduino programming language. The kit includes everything you need to complete nine example circuits that will teach you how to drive your RedBot, have it follow lines, control it remotely, and much more. This kit doesn’t require previous programming or electronics experience but it is recommended that you have a basic understanding or desire to learn about robotics.

Once you have assembled your RedBot, be sure to check the on-line SIK for RedBot Digital Guide which contains detailed step by step instructions on how to connect each circuit and assemble the kit into a full-fledged robot with all of the included parts. You’ll find the guide in the References section below. Full example code is provided and explained and the troubleshooting tips might help you out if you find yourself struggling. Once you’ve mastered each experiment, you can take what you’ve learned and use it to create your own robot platform.

The kit does not require any soldering and is recommended for anyone curious about robotics or if you have used the original SparkFun Inventor’s Kit and are looking for the next step in programming education.

SparkFun Inventor's Kit for RedBot Parts Overview

 

 

Circuit examples:

  • Circuit 1: Software Install and Basic Test
  • Circuit 2: Drive Forward
  • Circuit 3: Turning
  • Circuit 4: Push to Start & Making Sounds
  • Circuit 5: Bumpers
  • Circuit 6: Line Following with IR Sensors
  • Circuit 7: Encoder
  • Circuit 8: Accelerometer
  • Circuit 9: Remote Control
 

Includes:

  • 1x SparkFun RedBot Mainboard
  • 1x Shadow Chassis
  • 1x SparkFun RedBot Sensor - Accelerometer
  • 2x SparkFun RedBot Sensor - Mechanical Bumper
  • 3x SparkFun RedBot Sensor - Line Follower
  • 1x SparkFun RedBot Buzzer
  • 2x Hobby Gearmotor - 140 RPM
  • 2x Wheel - 65mm (Rubber Tire)
  • 1x Wheel Encoder Kit
  • 5x Jumper Wire - 3-pin, 6"
  • 1x SparkFun USB Mini-B Cable - 6 Foot
  • 1x SparkFun Mini Screwdriver
  • 4x AA Alkaline Battery - 1500 mAh
 

References:

SparkFun Inventor's Kit for RedBot - Related Products

SparkFun RedBot Basic KitSparkFun RedBot Basic Kit

SparkFun Line Follower ArrayInfrared Remote Control

© 2015 Všechna práva vyhrazena.

www.hwkitchen.com