Vyhledávání

Arduino Shield - XBee

Arduino Shield - XBee
  • Výrobce: Smart Projects
  • Kat. číslo výrobce: A000007
  • Hmotnost: 20g
  • Záruka (měsíců): 24
Kód produktu: AD21
Cena bez DPH: 949,59 Kč
Cena s DPH: 1 149,00 Kč
Dostupnost: Na vyžádání

Dobrá zpráva, přepínáme na nový e-shop v češtině!

Produkt můžete objednat na www.hwkitchen.cz.

Bastlení zdar!

pcb-hlavni

Arduino Shield - XBee

Description: The XBee Shield allows an Arduino board to communicate wirelessly using a Zigbee XBee wireless module. It is based on the XBee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options.

The shields breaks out each of the XBee's pins to a through-hole solder pad. It also provides female pin headers for use of digital pins 2 to 7 and the analog inputs, which are covered by the shield (digital pins 8 to 13 are not obstructed by the shield, so you can use the headers on the board itself). The XBee shield was created in collaboration with Libelium, who developed it for use in their SquidBee motes (used for creating sensor networks). XBee is a modified ZigBee protocol.

Note: for wireless communication, a second RF module is required

 

Features:

  • Up to 100m (~300') unobstructed range - 1 mW (0 dBm) power output
  • Up to 115.2 Kbps transfer rate (operating on 2.4Ghz frequency)
  • Designed for use with the Arduino USB Board
  • Uses a Zigbee XBee wireless module (included)
  • Transceiver module (receives and transmits)
  • ISM 2.4 GHz operating frequency
  • Industrial temperature rating (-40° C to 85° C)
  • Approved for use in USA, Canada, Australia and Europe
  • IEEE 802.15.4 compliant)
  • Advanced networking & low-power modes supported
  • RF data rate: 250 Kbps
  • Receiver sensitivity: -92 dBm
  • Supply voltage: 2.8 - 3.4 V
  • Transmit current: 45 mA (@ 3.3 V)
  • Receive current: 50 mA (@ 3.3 V)
  • Power-down sleep current: <10 µA

 

Dimensions: 62 x 62 mm

 

References:

© 2015 Všechna práva vyhrazena.

www.hwkitchen.com