Vyhledávání

GM862-QUAD GSM/GPRS Module

GM862-QUAD GSM/GPRS Module
  • Výrobce: Telit
  • Hmotnost: 19g
  • Záruka (měsíců): 24
Kód produktu: AD18
Cena bez DPH: 600,00 Kč
Cena s DPH: 726,00 Kč
Dostupnost: Vyřazeno

GM862-QUAD GSM/GPRS Module

Description: GSM Module GM862-QUAD can easily open a wonderful world of M2M (Machine-to-Machine) communication for you and your application!

This GSM module will allow you to connect your embedded device anywhere in the world where cell phones are used. This version (GM862-QUAD) is compatible with the various 850/900/1800/1900MHz frequencies of cellular networks across the globe.

Thie GSM Module is at first easy to use because it has embedded SIM card reader, antenna connector and the module is simply controlled via AT commands. On the other hand it is fully compatible with the various 850/900/1800/1900MHz frequencies of cellular networks and has many other features that allow making your application without any compromise.

All what you need to start a development with this GSM Module is an GM862 Evaluation Board + GSM Antenna MMCX or just a mating 50 pin Molex connector for your own PCB solution.

Note: This GSM module doesn´t support Python and it is an older hardware revision (chipset V3), but it works fine for most of the standard AT commands - classified on #SELINT=0 and #SELINT=1. It doesn´t support the Easy GPRS commands so we don´t recommend it for GPRS based applications. It can´t be upgraded to any newer firmware versions.

This module works well with the HW Kitchen GSM Library.

 

Features:

  • Software and pin compatible with previous GM862 modules
  • GSM Quad Band 850/900/1800/900 MHz
  • Simple control via AT commands
  • RoHS compliant
  • On board SIM card holder
  • 17mA average stand-by, 3.5mA in low-power mode
  • 250mA average operating current
  • Embedded TCP/IP stack
  • GPRS Class 10
  • Embedded FTP and SMTP Client
  • Data, Voice, SMS, and Fax
  • Extended temperature range (-40°C to +85°C)
  • Extended RF sensitivity
  • Supply voltage : 3.4V to 4.2V
  • 50 Ohm MMCX antenna connector
  • 50-pin Molex connector
  • Version V3 (6.04.204)
  • Extensive datasheets and forum support
  • Over-the-Air update

 

Dimensions: 43,9 x 43,9 x 6,9 mm

 

References:

© 2015 Všechna práva vyhrazena.

www.hwkitchen.com