Vyhledávání

Arduino Robot EU plug

Arduino Robot EU plug
  • Výrobce: Smart Projects
  • Kat. číslo výrobce: A000078
  • Záruka (měsíců): 24
Kód produktu: AD102
Cena bez DPH: 4 330,00 Kč
Cena s DPH: 5 239,30 Kč
Počet kusů skladem: 1
Dostupnost: Skladem

Arduino Robot EU plug

Description: The Arduino Robot is a great way you can learn about electronics, mechanics, and programming with no soldering required. It's a tiny computer on wheels that you can hack to perform all sorts of tasks! Just pop in the included color LCD screen, load up the Arduino IDE, plug in the USB cable, and you'll be ready to load any one of the included example programs. The robot comes with a number of integrated inputs; two potentiometers, five buttons, a digital compass, five floor sensors, and an SD card reader. It also has a speaker, two motors, and a color screen as outputs, and plenty of prototyping space and TinkerKit connectors for expansion. It even includes 4 rechargeable AA batteries and a charger.

The "brains" of the robot consists of two ATmega32u4 microcontrollers, which are the same ones used in the Leonardo. One on the Control Board (top) and the other on the the Motor Board (bottom). If you're just getting started with electronics and programming, you should work with the Control Board. As you become more experienced, you may want to tinker with the Motor Board.

This robot is everything you've wanted in an Arduino Robot but were too afraid to build!

 

Be sure to check out the product page for more info!

Arduino Robot EU Plug

Control Board Features:

  • Microcontroller ATmega32u4
  • Operating Voltage 5V
  • Input Voltage 5V through flat cable
  • Digital I/O Pins 5
  • PWM Channels 6
  • Analog Input Channels 4 (of the Digital I/O pins)
  • Analog Input Channels (multiplexed) 8
  • DC Current per I/O Pin 40 mA
  • Flash Memory 32 KB (ATmega32u4) of which 4 KB used by bootloader
  • SRAM 2.5 KB (ATmega32u4)
  • EEPROM (internal) 1 KB (ATmega32u4)
  • EEPROM (external) 512 Kbit (I2C)
  • Clock Speed 16 MHz
  • Keypad 5 keys
  • Knob potentiomenter attached to analog pin
  • Full color LCD over SPI communication
  • SD card reader for FAT16 formatted cards
  • Speaker 8 Ohm
  • Digital Compass provides deviation from the geographical north in degrees
  • I2C soldering ports 3
  • Prototyping areas 4
 
Motor Board Features:
  • Microcontroller ATmega32u4
  • Operating Voltage 5V
  • Input Voltage 9V to battery charger
  • AA battery slot 4 alkaline or NiMh rechargeable batteries
  • Digital I/O Pins 4
  • PWM Channels 1
  • Analog Input Channels 4 (same as the Digital I/O pins)
  • DC Current per I/O Pin 40 mA
  • DC-DC converter generates 5V to power up the whole robot
  • Flash Memory 32 KB (ATmega32u4) of which 4 KB used by bootloader
  • SRAM 2.5 KB (ATmega32u4)
  • EEPROM 1 KB (ATmega32u4)
  • Clock Speed 16 MHz
  • Trimmer for movement calibration
  • IR line following sensors 5
  • I2C soldering ports 1
  • Prototyping areas 2
 
Included Sensors and Extras:
  • Keypad with 5 keys
  • Knob potentiometer attached to analog pin
  • Arduino LCD Module with micro-SD Card Reader
  • SD card reader for FAT16 formatted cards
  • 8 Ohm Speaker
  • Digital Compass provides deviation from the geographical north in degrees
  • Five IR sensors for line following
  • 512 Kbit EEPROM that can be accessed via I2C
 
 
Dimensions: 
  • The Robot is 19cm in diameter and 10cm tall including wheels, GTFT screen and other connectors.
 

References:

© 2015 Všechna práva vyhrazena.

www.hwkitchen.com