Arduino Ethernet with PoE module + USB 2 Serial Converter

Arduino Ethernet with PoE module + USB 2 Serial Converter

Description: The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller. It can be programmed like an Uno via a six-pin FTDI -style serial connector. A separate power-over-Ethernet (PoE) module is soldered to the board to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available. An included Arduino USB 2 Serial adapter or any FTDI-style USB-to-serial converter can be used to program it. USB 2 Serial adapter converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Ethernet or any other boards with an FTDI cable-compatible connector. It features the Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The USB Serial module has an ISCP interface, allowing you to reprogram the chip when placed in DFU mode. The pinout on the connector is compatible with a standard FTDI header (as well as the Adafruit and Sparkfun USB-Serial adapters).

Arduino Ethernet Features:

• Arduino Ethernet Official Page