Vyhledávání

New Products Post!

03.04.2011 23:33

We are happy to announce new versions of great Seeeduino boards from Seeed Studio!

First we have here new Seeeduino V2.21 built on ATmega328. Compare to the previous version Seeeduino V328 it brings further improvements like real quartz crystal or USB/EXT auto power select and others. Design of this Arduino board is based on Diecimila scheme, 100% compatible to its existing program, Arduino shields and IDEs. 

Seeeduino V2.21 (Atmega 328P)

 

Following new Seeeduino board is the Seeeduino Mega V1.22! The Seeeduino Mega is an Arduino board based on ATmega1280 and derived from Arduino Mega. Compare to the Arduino Mega the Seeeduino Mega is much smaller, more flexible and offers new functions. The main improvement made on this version is that now all ports are 3.3V fully selectable!

Seeeduino Mega V1.22 Assembled

 

And also other new or updated electronic stuff...

This is a breakout board for Nordic's nRF24LU1+ system-on-chip wireless transceiver. The nRF24LU1+ features a fully integrated USB 2.0 compliant device controller, which allows for a very compact wireless USB dongle. Additional features include an 8-bit application microcontroller, 32 kB flash memory, 6 GPIO pins, SPI and UART support, and up to 2Mbps on air data rates.

Breakout Board for nRF24LU1+ with RP-SMA

 

This wireless module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature - very nice!

Transceiver nRF24L01+ Module with Chip Antenna

 

The Netduino Plus is an open source electronics platform using the .NET Micro Framework. The board features a 32-bit microcontroller and a rich development environment, making it a perfect solution for engineers and hobbyists alike. The Netduino Plus adds an ethernet connection and an SD socket for even greater functionality.

Netduino Plus

 

The Arduino Starter Kit is a perfect package to get going in the wonderful world of Arduino physical computing. The Starter Kit for Arduino - Flex UNO can be used in advanced projects, but is built with the beginner in mind, so whether you are an electronics novice or a seasoned soldering guru, this kit will get you well on your way to embedded electronic success.

Starter Kit for Arduino - Flex UNO

 

Want to start playing with sensors, but don't know where to start? The Sensor Kit v2 includes a sensor for just about every job. With everything included in this kit, you'll be able to sense acceleration, distance, compass heading, vibration, humidity, movement, ambient light, temperature, and more! These are our favorite sensors from each category.

Sensor Kit v2

 

Another Mini TRS to BNC converter cable for Oscilloscope DSO nano V2. You can directly convert any other oscilloscope BNC probe to a DSO nano compatible probe as shown on following example.

Mini TRS 3.5mm to BNC probe converter

 

This cable is intended for usage with Electronic Brick Shield V4 or Electronic Brick Chassis. It is compatible with V4 digital ports and provides connection of basic Electronic Bricks digital and analog modules.

Electronic brick- Half buckled 3 wire cable (5 PCs pack)

 

This is something really cool from Seeed Studio! Rainbowduino is an Arduino compatible controller board with professional LED driving capacity. The Rainbowduino is now built on ATmega328 and is completely prepared for a cool super bright 8x8 RGB LED Matrix!

Rainbowduino LED driver platform - ATmega 328

 

This is an updated breakout board for the ST's dual-axis LPR530AL gyro.  The LPR530AL measures angular velocity along the pitch and roll axes with a full scale of ±300°/s. Two different analog outputs are provided for both the x- and y- axes - one 1x amplified and the other 4x amplified.

Gyro Breakout Board - LPR530AL Dual 300°/s

 

This new version of WiFly Shield breaks out the PI09, FORCE WAKE, and the hardware reset lines. It also has a different crystal and uses the RN-131C. The WiFly Shield equips your Arduino the ability to connect to 802.11b/g wireless networks. The featured components of the shield are a Roving Network's RN-131G wireless module and an SC16IS750 SPI-to-UART chip. The SPI-to-UART bridge is used to allow for faster transmission speed and to free up the Arduino's UART.

WiFly Shield

Zpět

© 2015 Všechna práva vyhrazena.

www.hwkitchen.com